|
|
Post by virtu on Oct 7, 2011 14:53:15 GMT -8
Beautiful print release from Creep Machine. info@creepmachine.com Vernus Edition 25 + proofs Image Size 7 x 10 1/2 (W/2 inch borders) Certificate of Authenticity Artist Signed & Numbered Hahnemühle Bamboo Paper Hahnemühle Protective Spray Varnish $85  |
|
|
|
Post by hillsj2001 on Nov 15, 2011 22:12:09 GMT -8
how did i miss this?
|
|
|
|
Post by virtu on Nov 21, 2011 9:59:25 GMT -8
They are now signed, numbered and ready for release.
If anyone wants one email Josh over at Creep Machine.
info@creepmachine.com
|
|
|
|
Post by hillsj2001 on Nov 21, 2011 10:17:18 GMT -8
thanks virtu!
|
|
|
|
Post by hillsj2001 on Nov 26, 2011 9:39:14 GMT -8
tried emailing them...maybe i was too late
|
|
|
|
Post by virtu on Dec 15, 2011 8:12:25 GMT -8
They begin shipping next week.
Try Josh again.
info@creepmachine.com
|
|
|
|
Post by nevertrained on Dec 15, 2011 8:17:55 GMT -8
I've emailed several times without a response....bummer.
|
|
|
|
Post by virtu on Dec 15, 2011 8:22:52 GMT -8
Put "Virtu - Vernus" in the subject.
|
|
|
|
Post by hillsj2001 on Dec 15, 2011 9:21:04 GMT -8
Put "Virtu - Vernus" in the subject. thanks virtu...tried again |
|
|
|
Post by sixstringer on Dec 15, 2011 9:21:52 GMT -8
ditto
|
|
|
|
Post by thecreep on Dec 16, 2011 10:38:02 GMT -8
Sorry for the Silence everyone, thanks to Virtu for letting know people were on this forum trying to contact me.
The prints are on their way to me and I am currently busy getting the new site ready for launch. If you havent e-mailed me already and received a response, please do so again and I will get right back to you.
thanks
|
|
|
|
Post by hillsj2001 on Dec 28, 2011 6:24:38 GMT -8
Josh is the man....cheers!
|
|
|
|
Post by virtu on Dec 28, 2011 7:35:18 GMT -8
|
|
|
|
Post by sixstringer on Dec 28, 2011 8:14:51 GMT -8
+1 on the Vernus print.
Anyone close to Martin know what happened to his prints that were available in his webstore? Looks like he has a new website but no store. I was planning on snagging one or two later on. I've emailed a couple times but no reply.
|
|
|
|
Post by treweman on Dec 28, 2011 11:10:15 GMT -8
+1 Thanks for the help, sixstringer ... I owe you one.
|
|
|
|
Post by hillsj2001 on Jan 5, 2012 9:37:27 GMT -8
very excited to see the mail carrier at my door today, but the postal service wasn't too kind to the package  i have had amazing success with usps, but not this time  |
|
|
|
Post by sixstringer on Jan 5, 2012 13:40:36 GMT -8
Did they Taco it? How was the packaging?
|
|
|
|
Post by iamthetoe on Jan 5, 2012 14:42:25 GMT -8
Cheers to the Artchival community! I'm fairly new here and this piece just arrived today. I wanted to chime in as I think it may be a victim of its packing. Please take my input with a grain of salt, and don't be afraid to tell me I'm over-analyzing this, but...
My print also has some visible flaws. Outer packing was a stiff c'board envelope mailer which felt pretty sturdy and didn't appear damaged. Inner packing consisted of a 2-piece corrugate sandwich (taco?), with the print securely wrapped in tissue paper which was taped to the buns' edges (shell?) for stability. The ruffles in the corrugate actually got transposed onto the back of my print during shipment. I thought water damage initially, but didn't see any water stains and I can match the ruffle pattern to the corrugate.
I'm hoping those fade out over time if I store it flat beneath a couple of the wife's Cosmo's...The bottom right corner also has a small crease...probably nothing that won't frame out and difficult to reveal in pics, but the ruffling on the paper can be seen with minimal inspection.
If anyone else had similar results, I'm curious to what degree. I don't normally get smaller prints; they seem to be more prone to shipping damage. Thx for any input.
|
|
|
|
Post by hillsj2001 on Jan 6, 2012 9:06:11 GMT -8
Cheers to the Artchival community! I'm fairly new here and this piece just arrived today. I wanted to chime in as I think it may be a victim of its packing. Please take my input with a grain of salt, and don't be afraid to tell me I'm over-analyzing this, but... My print also has some visible flaws. Outer packing was a stiff c'board envelope mailer which felt pretty sturdy and didn't appear damaged. Inner packing consisted of a 2-piece corrugate sandwich (taco?), with the print securely wrapped in tissue paper which was taped to the buns' edges (shell?) for stability. The ruffles in the corrugate actually got transposed onto the back of my print during shipment. I thought water damage initially, but didn't see any water stains and I can match the ruffle pattern to the corrugate. I'm hoping those fade out over time if I store it flat beneath a couple of the wife's Cosmo's...The bottom right corner also has a small crease...probably nothing that won't frame out and difficult to reveal in pics, but the ruffling on the paper can be seen with minimal inspection. If anyone else had similar results, I'm curious to what degree. I don't normally get smaller prints; they seem to be more prone to shipping damage. Thx for any input. same bottom right corner also...might be the same on all from the edition... |
|
|
|
Post by thecreep on Jan 6, 2012 12:39:32 GMT -8
I was very worried about shipping a smaller print, and was told it was too small to use a tube which was my original feeling. I stated this on Expresso Beans for those that received damaged prints as well:
"I had sent a test print out a while back with this method and it seemed fine. However I should have paid less attention to what I have seen others do, and more attention to what the buyers appreciate shops do. It was an amateur mistake, and not one I will make again.
I am currently working on a few options to fix this situation for those who have received damaged prints, one of which is of course a refund.
For those who have received damaged prints, please e-mail me directly so that I know who needs to be taken care of.
I had expected to make a mistake or two while this new shop got started, but the fact that it was this print really hurts."
|
|
|
|
Post by jrog22 on Jan 10, 2012 20:21:51 GMT -8
Anyone get an extra Vernus? I'd take one...
|
|
|
|
Post by iamthetoe on Mar 31, 2012 10:23:50 GMT -8
It is worth noting that my replacement came in, and I felt that the correspondence from Josh was very good throughout the whole process. And, most importantly, the packing/shipping was well executed and the new print looks fantastic!
|
|
